🍽️ KitchenAid Appliance Repair · Spartanburg, SC

KitchenAid Appliance Repair in Spartanburg, SC — Dishwashers, Cooktops, Ranges and Refrigerators

KitchenAid has been making dishwashers since 1949, and its F-codes give a technician a clear place to start. We come to your Spartanburg home, read the code, test the part behind it and give you the repair price in writing before work starts.

We repair KitchenAid dishwashers, refrigerators, ranges, cooktops and wall ovens across Spartanburg and the 29301–29307 ZIP codes.

📞 Call (864) 215-2785

⏰ Open 8:00 AM – 7:00 PM · independent repair company — not affiliated with KitchenAid

Dishwasher repaired during an in-home service call in Spartanburg South Carolina 🍽️ KitchenAid dishwasher service

🍽️ Mobile, in-home KitchenAid appliance repair in Spartanburg — we come to you.

1919Year KitchenAid stand mixers began under Hobart
1949Year KitchenAid added dishwashers, starting with the KD-10
1986Year Whirlpool bought KitchenAid for $150 million
Until 7 PMEvening appointments, seven days a week

🏭 About the Brand

KitchenAid: A Mixer Company That Learned Dishwashers

KitchenAid began with stand mixers. The first, the C-10, appeared in 1918, and the stand mixer line started in 1919 under Hobart. Dishwashers followed in 1949 with the KD-10. KitchenAid moved into ranges after buying Chambers in 1985 and added refrigerators in 1986, the same year Whirlpool bought the brand for $150 million.

KitchenAid products are made in several places, including Ohio, South Carolina and Iowa. Today the brand sits under Whirlpool, alongside Maytag, JennAir and Amana, so diagnostic logic carries across, though the codes and parts differ.

What that means for your KitchenAid

KitchenAid dishwashers use an optical water sensor, a flow meter and a diverter motor, and each has its own code. Hard water can foul the first two. We read the code, then test the sensor and its wiring before replacing anything.

Dishwasher pipe being repaired during an in-home service call in Spartanburg South Carolina 🍽️ Drain & supply lines

🔧 A slow-drain code often ends at the drain hose or the garbage disposal connection, not the dishwasher.

🔧

KitchenAid products we repair in Spartanburg

  • Dishwashers
  • Refrigerators
  • Ranges, cooktops and wall ovens
  • Over-the-range microwaves
  • Washers and dryers
  • Ice makers

📋 Models & Known Faults

KitchenAid Models and the Faults We See Most in Spartanburg

KitchenAid dishwasher model families we see most carry the prefixes KDTE, KDTM, KDFE and KDFM, for example the KDFM404KPS. The faults below come from public repair references and safety notices.

Appliance and model familyWhat owners commonly reportWhat we test first
Dishwashers (KDTE, KDTM, KDFE and KDFM families)Slow drain (F8 E1), slow fill (F6 E1), heating and water-temperature faults (F3 E2), optical sensor faults (F3 E1), control board faults (F1 E1)Filter, drain hose and disposal connection, inlet screens and valve, heating element and thermistor, optical sensor lens
Glass cooktops (KCES950HSS/HBL and KCES956HSS/HBL)A 2019 safety notice covered these models for elements that could turn on without being switched onCheck model and serial against the notice first; then touch controls and board
Refrigerators and rangesTypical wear faults across the Whirlpool family: ice, defrost, igniters and elementsWe diagnose by symptom and verify the model before ordering parts

Dishwasher model families and codes come from a 2026 repair reference. The cooktop models come from a 2019 safety notice. We verify your exact model before ordering parts.

🚰

KitchenAid dishwasher won’t drain

F8 E1 is a slow-drain code.

A slow drain usually comes from a clogged filter, a kinked drain hose, a disposal knockout plug that was never removed, or a failed drain pump. The knockout plug is the surprise one: if you installed the machine or someone connected it to a disposal, the plug in the disposal inlet can block the flow. We check the filter, the hose and the plug, then the pump. Dishwasher repair →

Typical range

Filter and drain work $150–$280 · drain pump $200–$380

🌡️

KitchenAid dishwasher not heating or cleaning well

F3 E1, F3 E2 and F6 E4.

F3 E2 is a water-temperature fault. The causes are incoming water below the recommended 120°F, a failed heating element, a faulty thermistor or a relay not energizing the element. F3 E1 is the thermistor or the optical water sensor, and hard water or food can foul the optical lens. F6 E4 is the flow meter, and mineral deposits on its turbine are a common cause.

Typical range

Heating element $180–$330 · inlet valve $140–$280 · sensor or thermistor $150–$300

🔌

KitchenAid dishwasher control board or panel faults

F1 E1, F2 E1 and F2 E2.

F1 E1 is a main control board fault. The references list power surges and steam from the drying vent among the causes. F2 E1 is a stuck button or failed touch panel. F2 E2 is a communication problem between the panel and the board, from a loose ribbon cable, corroded pins or door flexing. Boards are expensive, so we test the connections first.

Typical range

Connections and cable $150–$300 · control board $300–$600+

🍳

KitchenAid glass cooktop acting on its own

Safety first, recall second.

If a surface element turns on by itself, switch off the breaker and call. A 2019 safety notice covered about 29,000 Whirlpool, KitchenAid and JennAir glass cooktops with touch controls, made from December 2016 to July 2019. KitchenAid models named in the notice include KCES950HSS/HBL and KCES956HSS/HBL. Check your model and serial first. Stove and cooktop repair →

Typical range

Elements and switches $150–$300 · control board $300–$600+

🔢 Error Codes

KitchenAid Error Codes: What They Mean and What to Check First

These KitchenAid dishwasher codes come from a 2026 repair reference. Older KitchenAid dishwashers flash numbered pairs instead, such as 1-1 for a water supply fault, and your manual decodes those.

CodeWhat it points toCheck first
F1 E1Main control board faultSurge or steam damage, relay, harness
F2 E1Stuck button or user-interface faultPanel, membrane, moisture behind the panel
F2 E2Panel-to-board communicationRibbon cable, pins, board
F3 E1Thermistor or optical water sensorFouled lens from hard water or food, harness
F3 E2Water temperature faultIncoming water under 120°F, element, thermistor, relay
F6 E1Slow fillSupply valve open, inlet screen, solenoid, supply pressure under 20 PSI
F6 E4Flow meterMineral deposits on the turbine, sensor, connector
F8 E1Slow drainFilter, hose, disposal knockout plug, drain pump
F8 E4No fill detectedSupply valve, frozen line, inlet valve
F9 E1Diverter motorMotor, jammed diverter disc, corrosion
FA E1Detergent dispenserCaked-on detergent, actuator, spring and latch

Codes follow a 2026 repair reference. One FAQ on that source mentions an F7E1 heating code that is not in its own list, so we treat F7E1 as unconfirmed. Your manual is the final authority.

⚠️

Check your KitchenAid for recalls by model and serial number

The KitchenAid KCES950HSS/HBL and KCES956HSS/HBL glass cooktops were covered by a 2019 safety notice for elements that could turn on without being switched on. For anything else, enter your model and serial number at cpsc.gov or on KitchenAid’s recall page.

If a recall applies, the fix is usually free through the manufacturer, and we will tell you so rather than quote a paid repair.

🌦️ Local Factors

Why KitchenAid Appliances Fail Differently in Spartanburg County

💧

Hard well water and sensors

Around Inman, Chesnee, Woodruff, Roebuck and Highway 176, hard granite-bedrock well water fouls the optical water sensor and builds mineral deposits on the flow meter turbine. Those are exactly the F3 E1 and F6 E4 faults. Read more on how well water affects appliances in Spartanburg County. In the city, water is soft at about 15 ppm.

⚡

Storm surges

Hurricane Helene left 174,694 Spartanburg County customers without power in September 2024. The repair references list a power surge among the causes of F1 E1. If your dishwasher quit after a storm, tell us.

🏠

Older kitchens

The median home inside Spartanburg city limits was built in 1968. Older kitchens often have disposals installed years ago and drain lines that sag, which matters when a dishwasher shows a slow-drain code.

🌡️

Steam and humidity

The references link steam from the drying vent to control board damage. A kitchen with poor ventilation and a humid Upstate summer makes that worse.

✅ Owner Checklist

A Spartanburg KitchenAid Owner’s Checklist

  • Rinse the dishwasher filter monthly. A clogged filter is the first suspect for an F8 E1.
  • Check your water heater setting Incoming water should be around 120°F so an F3 E2 does not trip.
  • Descale if you have hard water Hard water can foul the optical sensor and the flow meter.
  • Remove the disposal knockout plug if the dishwasher drains into a disposal and has never drained well.
  • Photograph the model and serial label before calling.

💵 Costs

What KitchenAid Appliance Repair Costs in Spartanburg

KitchenAid repairs follow standard Spartanburg ranges. You get the exact figure in writing before work starts. Spartanburg-area repairs average around $159, with most between $81 and $246.

Common KitchenAid repairTypical range
Dishwasher filter and drain work$150 – $280
Dishwasher drain pump$200 – $380
Dishwasher inlet valve$140 – $280
Dishwasher heating element$180 – $330
Cooktop element or switch$150 – $300
Control board$300 – $600+

Repair or replace your KitchenAid?

A dishwasher repair passing about $300–$400 is where replacement starts to compete, especially on an older machine. A filter, drain or inlet fix is an easy yes. A control board at $300–$600+ on an older unit is the case to think about. A cooktop covered by the 2019 safety notice is a different question altogether: check the notice first.

Full Spartanburg repair cost guide →

🗺️ Service Area

KitchenAid Appliance Repair Across Spartanburg, ZIPs 29301–29307 and the County

We are a mobile repair company, so wherever your KitchenAid is sitting, the shop comes to the driveway. We cover all seven Spartanburg ZIP codes, 29301 through 29307, and the towns around them.

🏘️

Spartanburg neighborhoods

Beaumont Village, Cleveland Heights-Northside, Converse Heights, Forest Hills, Forest Park, Hampton Heights, Highland, Liberty Heights, Maxwell Hills, Park Hills North and South, Pineview Hills, South Converse, Summerhill Estates, White’s Mill and Woodland Heights.

📍

Communities right around the city

Boiling Springs, Fairforest, Southern Shops, Saxon, Arcadia, Wellford, Duncan, Roebuck, Reidville, Pacolet, Inman, Inman Mills, Lyman, Una, Startex and Moore.

🚐

Cities and towns across the county

Greer, Woodruff, Gaffney, East Gaffney, Chesnee, Campobello, Cowpens, Landrum, Pacolet, Lyman, Duncan, Inman, Wellford and Reidville. Tell us your ZIP when you call and we will confirm the visit.

📞 KitchenAid dishwasher showing an F-code?

Tell us the code and the model on the call. We bring the likely parts.

📞 Call (864) 215-2785

❓ Questions

KitchenAid Appliance Repair in Spartanburg — FAQs

📍 Do you repair KitchenAid appliances in Spartanburg, SC?

Yes. We repair KitchenAid dishwashers, refrigerators, ranges and cooktops at your home across Spartanburg and Spartanburg County. We are an independent repair company, not a KitchenAid-authorized service center.

🚰 What does F8 E1 mean on my KitchenAid dishwasher?

A slow drain. Check the filter, the drain hose and the disposal knockout plug. If those are clear, the drain pump may have failed.

🌡️ What does F3 E2 mean on my KitchenAid dishwasher?

A water-temperature fault. Incoming water below 120°F, a failed heating element, a faulty thermistor or a relay not energizing the element are the usual causes.

💧 Why does my KitchenAid dishwasher show F3 E1 or F6 E4?

F3 E1 points to the thermistor or the optical water sensor, which hard water or food can foul. F6 E4 is the flow meter, where mineral deposits on the turbine are a common cause.

🔌 What does F1 E1 mean on a KitchenAid dishwasher?

A main control board fault. Surges, steam from the drying vent, a failed relay or a loose harness can cause it. We test connections before recommending a board.

⚠️ Is my KitchenAid cooktop under a recall?

KCES950HSS/HBL and KCES956HSS/HBL glass cooktops were covered by a 2019 safety notice. Check your model and serial at cpsc.gov or on KitchenAid’s recall page.

🏢 Are you a KitchenAid-authorized service center?

No. We are an independent mobile repair company. If your appliance is under KitchenAid’s own warranty, call KitchenAid first so you do not lose coverage.

📅 Can you come the same day?

Often, if you call in the morning. If today’s route cannot reach you, we say so on the phone. Same-day repair →

⏰ Open 7 Days · 8:00 AM – 7:00 PM

KitchenAid Appliance Repair, at Your Door

Call with your model number and the code on the display, and we will tell you what we expect to find. The exact price goes in writing before work begins.

  • Open 8:00 AM – 7:00 PM — evenings covered, seven days a week
  • Same-day slots when the route allows — call early
  • We come to you anywhere in Spartanburg and Spartanburg County

📞 Call (864) 215-2785

Repairing Pros Spartanburg · 8202 Maxwell Cir, Spartanburg, SC 29303
Mobile, in-home KitchenAid appliance repair. Our address is our base — not a walk-in or drop-off shop. We are an independent repair company, not affiliated with or authorized by KitchenAid.

🎫 EPA 608 certified 🛡️ Insured 🧾 Itemized invoice 🔩 Failed parts shown

🗺️ Covering Spartanburg and the 29301–29307 ZIP codes for in-home KitchenAid repair.